Remove the cover plate to do this, but carefully reassemble. If you have foot switches, check for signs of gasket seal deterioration, cracked seal and intrusion of water with resulting rust under the deck. This wiring behind the switch should also be checked for wiring and terminal corrosion. The connection port should be well sealed with a rubber or other cap and lubricated with a product such as dielectric electrical connection grease to help prevent corrosion of the contacts and the wiring underneath.
Inspect, clean, grease and tighten connections on solenoid, which is often in the damp salty space under forepeak.Ĭheck connections for your hand switch. If it isn't you've got it wrongly positioned. Make sure the dog goes back in place and make sure the rope wheel is pushed outward by the springs as you reinstall it.
